Adding Detergent; Adding Multi-Tablets; Setting And Starting A Programme - Zanussi ZDV14002FA User Manual

ADDING DETERGENT

If the programme has a prewash phase, put a small quantity of detergent also in compartment B.

ADDING MULTI-TABLETS

• Do not fill the salt container and the rinse aid dispenser.
• Adjust the water softener to the lowest level.
• Set the rinse aid dispenser to the lowest position.

SETTING AND STARTING A PROGRAMME

The AUTO OFF function
This function decreases energy consumption by deactivating automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the programme.
• After 5 minutes if the programme has not started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme
selection mode.
3. Press the button related to the programme you want to start. The related programme indicator comes
on.
4. Close the appliance door to start the programme.
10
1
2
1
2
A
B