Voice Mail; Accessing Voice Mail Simplified; Answering Machine Ports And Caller Id; Disconnecting Conversation Record Simplified - NEC DS1000 Release Notes

DS1000 02.10.09 Release Notes
Enhanced Features in 02.10.09

Voice Mail

Accessing Voice Mail Simplified

Answering Machine Ports and Caller ID

Disconnecting Conversation Record Simplified
Personal Answering Machine Emulation Soft Key Enhancements
48 N 02.10.09
Software version 02.10.09 provides the following Voice Mail enhancements:
To call your mailbox:
G
Press MW .
There is no need to press SPK , ICM , or lift the handset first. The Number of Messages
display previously accessed by press MW while idle is removed. This information is
already provided by the V-Mail nn ( VMnn ) soft key.
While connected to your mailbox, your MW key will be on (red).
To hang up while using your mailbox:
G
Press MW .
Your MW key will go out.
When connecting a customer-provided answering machine to a system analog port, you should
designate it as a Voice Mail port (1802-Voice Mail Port = Y). This will cause any trunk call picked
up by the answering machine not to be marked as answered in the Caller ID log. For this applica-
tion, do not enable Voice Mail in 0201-Voice Mail Installed. If you do, the analog port marked as a
Voice Mail port will no longer Key Ring for incoming trunk calls.
When you want to stop Conversation Record
G
Press your lit MW key.
Recording stops and the call is sent to your voice mailbox.
When setting up Personal Answering Machine Emulation, display keyset users can dial codes from
the dial pad or use their soft keys.
22-Button and 34-Button Display Telephone Operation
To activate Personal Answering Machine Emulation:
1. Press ICM and dial *3.
OR
Press PGM + CFWD .
2. Dial 7 or press MORE + AME . You see:
3. Dial 2 or press ALL to forward all calls.
OR
Dial 8 or press TRNK to forward just trunk calls.
It is no longer necessary to press SPK to hang up.
DS1000 Release Notes