Three-Party Conference; Voice Mail System; Dnd (Do Not Disturb); To Set Dnd - NEC DT930 Series User Manual

1.
while station is ringing.
3-18 TUE 8:30AM
CALLING
Voice
MW
(3) Press VOICE. Speak to called party.

Three-Party Conference

(1) While Station A and Station B are engaged in a
Two-party connection, Station A presses Conf
softkey.
Station A hears Special Dial Tone.
Station B hears the music on hold.
TALKING TO
Conf
(2) Station A dials a desired Station Number (Station
C).
3-18 TUE 8:30AM
TALKING TO
ADD
Rls
(3) After Station C answers the transferred call,
Station A presses ADD softkey.
3-18 TUE 3:49PM
ICM Dial
Begin DIR
STA 101
VMsg

STA 101
Station Number
of Station C
STA 105
Station Number
of Station C
CONF
(4) Station A presses the Begin softkey.
(5) Three-Party call is now established.

Voice Mail System

Originate
❍
Press the VMsg softkey.

DND (Do Not Disturb)

This feature restricts incoming calls to a terminal.
This feature is set by Soft key or feature key. The
feature key is set using system data setting at
initial installation. For details, contact the system
administrator.

To Set DND

(1) Press the Speaker key.
The Call Indicator lamp goes off.
The Speaker key lamp lights red.
The Line key lamp lights green.
(2) Press Soft key (>>>>) when Soft key is used.
(3) Press Soft key (DND) or DND feature key.
(4) Press the Speaker key.
The Speaker key lamp goes off.
The Line key lamp goes off.
115