Hilti WSR 36-A Original Operating Instructions page 23

Stroke rate regulator
=
Control switch
%
Safety lock
&
Rating plate
(
Grip
)
Battery release button
+
Battery state of charge display
§
3.2 Intended use
The product described is a cordless reciprocating saw. It is designed for cutting wood, wood-like materials,
metals and plastics.
The product is designed for two-handed operation.
▶ Use only Hilti Li-ion batteries from the B 36 series with this product.
▶ Use only the Hilti battery chargers from the C4/36 series for these batteries.
3.3 Possible misuse
▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes that still contain liquids.
▶ Do not saw into unknown materials.
3.4 Lithium­ion battery status display
The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge state of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light up.
3 LEDs light up.
2 LEDs light up.
1 LED lights.
1 LED blinks.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
Note
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.
3.5 Items supplied
Reciprocating saw, saw blade, operating instructions.
Note
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Center or online at: www.hilti.group
3.6 Stroke rate setting
Material to be cut
Wood
Wood containing nails
Interior finishing, drywall
Plastic
Printed: 30.05.2017 | Doc-Nr: PUB / 5071396 / 000 / 04
Battery
/
Air vents
:
Forward gripping area (hand guard)
∙
Contact shoe adjustment button
$
Contact shoe
£
Saw blade
|
Meaning
• Charge state: 75 % to 100 %
• Charge state: 50 % to 75 %
• Charge state: 25 % to 50 %
• Charge state: 10 % to 25 %
• Charge state: < 10 %
• The battery has overheated or is completely
discharged.
• The power tool is overloaded or has overheated.
Suggested stroke rate settings
5-6
5-6
3-4
3-4
English 17