DVD50-XEU(20-35)
1/27/03 6:40 PM
VCR
Changing the Preset Station Table
You can rearrange the Station Table and give different programme
numbers to the stations listed according to your own preferences.
Language
: English
Install
1
After pressing the MENU, press the ENTER or ❿ .
User Set
Result:
Auto Power Off
: Off
Screen Messages
: On
.
2
Press the corresponding
.
option.
3
Press the ENTER or ❿ buttons to select this option.
Result:
Install
4
Press the corresponding
Setup
Auto Setup
Manual Setup
VCR Output CH
:CH 60
5
Press the ENTER button to select this option.
Result:
.
6
Press the corresponding
.
TV programme is selected.
Result:
7
To change the programme number assigned to a station press the
ENTER button on the remote control. (For example, To move a TV
TV STATION TABLE
station in programme 1 to programme 3)
PR
CH
NAME
1
21
----
8
Press the
2
3
And then press ENTER again to swap the position.
4
5
9
On completion, press the RETURN button four times to exit the
SWAPPING:ENTER
MENU
menu.
DELETE:CLEAR
TV STATION TABLE
PR
CH
NAME
1
2
3
21
----
4
5
SWAPPING:ENTER
MENU
DELETE:CLEAR
22
Page 22
The Setup menu is displayed.
,
buttons to select the
Install
❷
The
Install
menu is displayed.
or
buttons, until the
Manual
❷
option is selected.
The
TV STATION TABLE
menu is displayed.
or
buttons, until the required preset
❷
The selected station is displayed at the same time on
the television screen.
or
buttons to select required position.
❷
Setting the DVD-VCR Output Channel
Your DVD-VCR output channel may need to be changed if the
pictures suffer from interference or if your TV cannot find the
pictures.
Also, you can change the DVD-VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
After pressing the MENU, press the ENTER or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
,
buttons to select the
❷
option.
3
Press the ENTER button to select this option.
Result:
The
Install
menu is displayed.
4
Press the
or
buttons, until the
VCR Output CH
❷
selected.
5
Select the required output channel (CH21~CH69) by pressing the
ENTER or ❿ buttons.
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 14).
VCR
Language
: English
Install
User Set
Auto Power Off
: Off
Screen Messages
: On
.
.
Install
Clock Set
Install
Auto Setup
Manual Setup
CH:21
:
option is
VCR Output CH
:CH 60
CH:36
:
CH:69
.
.
23