Subtitle Language; Digital Output - Samsung SV-DVD50 Instruction Manual

DVD50-XEU(45-53) 1/27/03 6:39 PM
DVD

Subtitle Language

To set the Subtitle Language to your preferred language, follow
these steps. If your preferred language is available on a DVD, your
Subtitle Language will automatically be set to the language you
choose.
Setup
Setup
DVD DVD VCR Option Language
Display Setup 1 Open "MENU"
Setup :
Press the MENU button while the DVD is in Stop mode.
Program Clock Install Exit
. 2 Select "DVD"
Use the
.
then press the ENTER or
3 Select "Subtitle"
Highlight "Subtitle", then press the ENTER or
Language Setup
Disc Menu : English
4 Set "Subtitle Language" Preference
Audio : English
Subtitle : Automatic
Highlight your preferred language for subtitles, then press the
ENTER or
Subtitle Language
Automatic
Subtitle
46
Page 46
or
buttons to highlight "DVD"
❷
❿
buttons.
❿
buttons.
❿
buttons.

Digital Output

If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
NOTE: Select "Bitstream" ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD-VCR back panel.
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
or
Use the ❷ buttons to highlight "DVD "
❿
then press the ENTER or buttons.
3 Select "Audio Setup"
❿
Highlight "Audio Setup", then press the ENTER or buttons.
4 Set "Dolby Digital Output"
❿
Highlight "Dolby Digital Output" then press the or ENTER buttons
to select one of the following options:
• PCM - To use your DVD-VCR with an A/V receiver NOT
equipped with a Dolby Digital decoder.
• Bitstream – To use your DVD-VCR with an A/V receiver
equipped with a Dolby Digital decoder.
DVD
Setup
Setup
Display Setup
Setup :
.
.
PCM
Dolby Digital Out
Bitstream
MPEG-2 Digital Out
dts
PCM Down Sampling
47