Mpeg-2 Digital Out; Dts; Dynamic Compression; Pcm Down Sampling - Samsung SV-DVD50 Instruction Manual

DVD50-XEU(45-53) 1/27/03 6:39 PM
DVD

MPEG-2 Digital Out

If your A/V receiver is equipped with a MPEG-2 decoder, your
DVD-VCR can output MPEG-2 5.1 sound, but you MUST enable
this feature in the menu system to prevent damage to your
Setup
speakers.
Setup
Display Setup
Setup :
1 Open "MENU"
.
With the DVD in stop mode, press the MENU button.
.
2 Select "DVD"
Use the
then press the ENTER or
3 Select "Audio Setup"
Dolby Digital Out
Highlight "Audio Setup," then press the ENTER or
PCM
MPEG-2 Digital Out
Bitstream

dts

4 Set "MPEG-2 Digital Out"

PCM Down Sampling

Highlight "MPEG-2 Digital Out," then press the
button to select one of the following options:
• PCM - To use your DVD-VCR with an A/V receiver NOT
• Bitstream – To use your DVD-VCR with an A/V receiver
DVD
DTS
If your A/V receiver is equipped with a DTS decoder, your
DVD-VCR can output DTS digital sound, but you MUST enable this
feature in the menu system.
NOTE: Select "On" ONLY if you have connected a DTS-equipped
Setup
A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on
Setup
Display Setup
the DVD-VCR back panel.
Setup :
1 Open "MENU"
.
With the DVD in stop mode, press the MENU button.
.
2 Select "DVD"
Use the
then press the ENTER or
3 Select "Audio Setup"
Dolby Digital Out
Highlight "Audio Setup," then press the ENTER or
MPEG-2 Digital Out
Off
dts
On
4 Set "dts"
PCM Down Sampling
Highlight "dts," then press the ENTER or
the following options:
• Off - To use your DVD-VCR with an A/V receiver NOT equipped
• On – To use your DVD-VCR with an A/V receiver equipped with
48
Page 48
or
buttons to highlight "DVD "
❷
❿
buttons.
❿
buttons.
❿
or ENTER
equipped with a Dolby Digital decoder.
equipped th a Dolby Digital decoder.
or buttons to highlight "DVD "
❷
❿
buttons.
❿
buttons.
❿
buttons to select one of
with a dts decoder.
a dts decoder.

Dynamic Compression

Dynamic Compression constrains the dynamic range, i.e. the
difference between the quietest and loudest passages of a DVD
soundtrack. This enables you to limit loud noises, such as
explosions, or raise the volume of quiet passages, such as
whispering, while watching a movie. This is convenient for viewing
movies late at night.
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
or
Use the ❷ buttons to highlight "DVD "
❿
then press the ENTER or buttons.
3 Select "Audio Setup"
❿
Highlight "Audio Setup," then press the ENTER or buttons.
4 Set "Dynamic Compression"
Highlight "Dynamic Compression," then press the Right or ENTER
buttons to select one of the following options:
• On - The total dynamic range of the DVD soundtrack will be
compressed, so quiet passages will be louder and loud
passages will be softer.
• Off – The original dynamic range will be preserved.
PCM Down Sampling
1 Open "MENU"
Press the MENU button while the DVD is in Stop mode.
2 Select "DVD"
or
Use the ❷ buttons to highlight "DVD "
❿
then press the ENTER or buttons.
3 Select "Audio Setup"
❿
Highlight "Audio Setup," then press the ENTER or buttons.
4 Set "PCM Down Sampling"
Highlight "PCM Down Sampling", then press the ENTER or
buttons to select one of the following options:
• Off – When the disc with 96K of Audio disc insert in, it will output
96K without any change.
• On - When the disc with 96K Audio inserted in, it will downsize
96K to 48K and output it.
DVD
Setup
Setup
Display Setup
Setup :
.
.
Dolby Digital Out
MPEG-2 Digital Out
dts
Off
On
PCM Down Sampling
DVD
Setup
Setup
Display Setup
Setup :
.
.
❿
Dolby Digital Out
MPEG-2 Digital Out
dts
Off
PCM Down Sampling
On
49