Selecting The Colour Mode; Nicam; Intelligent Picture Control; Videoplus+ Extend - Samsung SV-DVD50 Instruction Manual

DVD50-XEU(20-35) 1/27/03 6:40 PM
VCR

Selecting the Colour Mode

Before recording or playing back a cassette, you can select the
required system standard.
Otherwise, the system automatically selects the reception standard
when you select AUTO.
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
.
.
1 After pressing the MENU, press the ENTER or ❿ .
Result:
2
Press the corresponding
User Set
User Set
Auto
Cocle System : AUTO
PAL
3 Press the ENTER button to select this option.

NICAM

: On
B/W
Result:
IPC : On
Videoplus Extend : Off
4 Press the corresponding
System
.
5 Press the Enter or ❿ button to select
.
6 On completion, press RETURN three time to exit the menu.
VCR
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Language : English
Please refer to page 37.
Install
1
User Set
Auto Power Off : Off
Screen Messages : On
.
2
.
3
4
User Set
Cocle System : AUTO 5
On
NICAM : On
Off
IPC : On
Videoplus Extend : Off
.
.
6
24
Page 24
When playing back a cassette, the standard is
automatically selected by the DVD-VCR.
When you playback an NTSC-recorded tape on this DVD-
VCR make a setting on the colour system according to your
TV. If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
The Setup menu is displayed.
, buttons to select the
❷
option.
The User Set menu is displayed.
or buttons, until the
❷ Colour
option is selected.
Auto PAL B/W .
Auto When playing back a cassette, the system standard is
automatically selected by the DVD-VCR.
B/W Black and White
After pressing the MENU, press the ENTER or ❿ .
Result: The Setup menu is displayed.
Press the corresponding , buttons to select the
❷
User Set option.
Press the ENTER button to select this option.
Result: The User Set menu is displayed.
Press the corresponding or buttons, until the NICAM option
❷
is selected.
To... Press ENTER or ❿, until...
Mono mode is displayed.
OFF
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode ON is displayed.
ON: Normally set at this position.
On completion, press RETURN three times to exit the menu.

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the MENU button on the remote control.
Result: The Setup menu is displayed.
2 Press the ENTER or ❿ .
Result: The Setup menu is displayed.
3
Press the corresponding , buttons to select the
❷
option.
User Set
4 Press the ENTER or ❿ buttons to select this option.
Result: The menu is displayed.
User Set
5
Press the corresponding or buttons, until the IPC
❷
selected.
6 Press the ❿ or Enter buttons to select the IPC (intelligent picture
control) option.
When intelligent picture control mode is ON , the sharpness
of the image is adjusted automatically.
7
To adjust the sharpness manually, press the button to turn the
❷
IPC mode OFF .
8 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
9 On completion, press the RETURN button again.

VIDEOPLUS+ EXTEND

To prevent delays or over-runs the VCR has a function called
VideoPlus EXTEND allowing you to extend the recording time by up
to 60 minutes.
Only use if PDC is not available or set to OFF.
1 After pressing the MENU, press the ENTER or ❿ .
2
Press the corresponding , buttons to select the User Set
❷
option.
3 Press the ENTER or ❿ button to select this option.
Result: The menu is displayed.
User Set
4
Press the corresponding or buttons, until the
❷
VideoPlus Extend option is selected.
5 Press Enter or ❿ buttons to set the Videoplus Extend time by
increments of 10 minutes.
6 To turn off, press ❿ or ENTER buttons repeatedly until
shows.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
.
.
Clock Set
option is
User Set
Cocle System : AUTO
NICAM : On
On
IPC : On
Off
Videoplus Extend : Off
.
.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
.
.
User Set
Cocle System : AUTO
NICAM : On
IPC : On Off
10
VideoPlus Extend : Off
:
OFF 60
.
.
25