Presetting The Stations Manually; Clearing A Preset Station - Samsung SV-DVD40 Instruction Manual

VCR

Presetting the Stations Manually

You do not need to preset the stations manually if you
have already set them automatically.
Language : English
1 After pressing the MENU, press the OK or ❿ .
Install
Result: The Setup menu is displayed.
User Set
Auto Power Off : Off
Screen Messages : On
2 Press the corresponding
option.
3 Press the OK or ❿ to select this option.
Result: The
4
Press the corresponding
option is selected.
Setup
Install
Auto Setup
5 Press the OK or ❿ to select a
Manual Setup
Result:
VCR Output CH : CH 60
6
Press the
required.
7 Press the ❿ button to preset the station.
Result:
8 Press the ➛ or ❿ buttons to start scanning channel.
Result: The frequency band is scanned and the first station
found is displayed.
TV STATION TABLE
9
Press the
PR CH NAME DEC
The station name is set automatically from the broadcast signal.
1
2
10 To change the programme's name, press the ❿ button.
3
Result:
4
5 11 To...
SWAPPING : OK
Select a character
DELETE : CLEAR RETURN
in the name
Move to the next or
previous character
MANUAL TUNING
12
If you...
PR :
CH : - - -
Wish to store the
MFT : -
station displayed
DECODER : OFF
NAME : - - - -
MEMORY : OK
RETURN
Do not wish to
store the station
displayed
13 Repeat this procedure from Step
stations have been stored.
14
On completion, press the RETURN button four times to exit the
menu.
22
, buttons to select the Install
❷
Install menu is displayed.
or buttons, until the Manual
❷
Manual Setup option.
The TV STATION TABLE menu is displayed.
or buttons to select a programme number as
❷
The MANUAL TUNING menu is displayed.
or buttons until the NAME is selected.
❷
The first letter of the name flashes.
Then...
Press the or button until the
❷
required character is displayed
(letters, numbers or "-" character).
Press the ❿ or ➛ buttons
respectively.
Then...
Press the corresponding or buttons,
❷
until the MFT is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station
Press the corresponding or buttons,
❷
until the is selected.
CH
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
12
Go back to the beginning of Step
6 onwards, until all the required

Clearing a Preset Station

If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2 Press the corresponding , buttons to select the
Install
❷
option.
3 Press the OK or ❿ to select this option.
Result: The Install menu is displayed.
4
Press the corresponding or buttons, until the
❷
Setup option is selected.
Press the OK or ❿ to select a
5 Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
6 Press the corresponding or buttons, until the required preset
❷
TV station (PR) is selected.
7
Press the CLEAR button.
8 6
Repeat the same procedure from Step onwards until all the
required stations have been cleared.
9
On completion, press the RETURN button four times to exit the
menu.
VCR
Language : English
Install
User Set
Auto Power Off : Off
Screen Messages : On
Install
Auto Setup
Manual Setup
VCR Output CH : CH 60
Manual
TV STATION TABLE
PR CH NAME DEC
1 21
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
23
PR
1
2
3
4
5
SWA
DEL