Disc Menu Language; Audio Language; Subtitle Language; Dolby Digital Out - Samsung SV-DVD40 Instruction Manual

DVD

Disc Menu Language

To set the Disc Menu Language to your preferred language, follow
these steps. If your preferred language is available on a DVD, your
Setup
Disc Menu Language will automatically be set to the language you
Setup
choose.
Display Setup
Setup :
1 Open "MENU"
Press the MENU button while the DVD is in Stop mode.
2 Select "DVD"
Use the
then press the OK or
Language Setup
Disc Menu : English
3 Select "Language Setup"
Audio : English
Highlight "Language Setup", then press the OK or
Subtitle : Automatic
4 Select "Disc Menu"
Highlight "Disc Menu", then press the OK or
5 Set "Disc Menu Language" Preference
Highlight your preferred language for disc menus, then press the
OK button.
Disc Menu Language
Disc Menu
DVD

Audio Language

Language Setup
To set the Audio Language to your preferred language, follow these
Disc Menu : English steps. If your preferred language is available on a DVD, your Audio
Audio : English
Language will automatically be set to the language you choose.
Subtitle : Automatic
1 Open "MENU"
Press the MENU button while the DVD is in Stop mode.
2 Select "DVD"
Use the
then press the OK or
3 Select "Audio"
Highlight "Audio," then press the OK or
4 Set "Audio Language" Preference
Highlight your preferred language for audio soundtracks, then
press the OK button.
48
or
buttons to highlight "DVD Setup,"
❷
❿
buttons.
❿
buttons.
❿
buttons.
or
buttons to highlight "DVD Setup,"
❷
❿
buttons.
❿
buttons.

Subtitle Language

To set the Subtitle Language to your preferred language, follow
these steps. If your preferred language is available on a DVD, your
Subtitle Language will automatically be set to the language you
choose.
1 Open "MENU"
Press the MENU button while the DVD is in Stop mode.
2 Select "DVD"
Use the or buttons to highlight "DVD"
❷
❿
then press the OK or buttons.
3 Select "Subtitle"
❿
Highlight "Subtitle", then press the OK or buttons.
4 Set "Subtitle Language" Preference
Highlight your preferred language for subtitles, then press the
❿
OK or buttons.

Dolby Digital Out

If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
NOTE: Select "Bitstream" ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD back panel.
1 Open "MENU"
With the DVD in stop mode, press the MENU button.
2 Select "DVD"
Use the or buttons to highlight "DVD "
❷
❿
then press the OK or buttons.
3 Select "Audio Setup"
❿
Highlight "Audio Setup", then press the OK or buttons.
4 Set "Dolby Digital Out"
❿
Highlight "Dolby Digital Output" then press the or OK buttons
to select one of the following options:
• PCM - To use your DVD-VCR with an A/V receiver NOT
equipped with a Dolby Digital decoder.
• Bitstream – To use your DVD-VCR with an A/V receiver
equipped with a Dolby Digital decoder.
DVD
Setup
Setup
Display Setup
Setup :
Language Setup
Disc Menu : English
Audio : English
Subtitle : Automatic
Subtitle Language
Automatic
Subtitle
DVD
Setup
Setup
Display Setup
Setup :
PCM
Dolby Digital Out
Bitstream
MPEG-2 Digital Out
DTS
PCM Down Sampling
49