Using The Timer Programming Feature; Checking A Preset Recording; Cancelling A Preset Recording - Samsung SV-DVD40 Instruction Manual

Hide thumbs Also See for SV-DVD40:
Table of Contents

Advertisement

VCR

Using the Timer Programming Feature

The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
Timer Method
to be broadcast. Up to six programmes can be preset.
Standard
VideoPlus
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result:
2
Press the OK button to select
Result:
Press ❿ to select the input source.
3
PR
Day
Start
Stop
Speed
V/P
4
Select the required station by pressing the
WE 1
19 : 00 19 : 30
SP
Off
INPUT SEL. to select the AV1, AV2 or AUX input sources.
:
:
:
:
5
Press ❿ to select the recording day.
:
:
:
:
6
Select the required day by pressing the
7
Press ❿ to select the recording start time.
8
Select the required hour value by pressing the
9
Press ❿ to select the minutes.
10
Select the required minute value by pressing the
11
Press ❿ to select the recording stop time.
STANDBY/ON
OPEN/CLOSE
12
Select the required recording stop time by pressing the
17
buttons, following the same procedure as when selecting the
recording start time.
Press ❿ to select the recording speed.
13
14
Press the
(Long Play),
15
Press the
mode (marked
16
When you have finished, press the RETURN button.
17
Press the STANDBY/ON button to activate the timer.
Result:
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
36
The timer selection is displayed.
Standard
option.
The
TIMER PROGRAMMING
menu is displayed.
,
buttons or
or
buttons.
or
buttons.
or
buttons.
or
or
buttons to select the
(Standard Play),
SP
LP
Auto
(Auto Tape Speed Select) recording speeds.
or
buttons to toggle between the PDC
On
) and the non PDC mode (marked
Off
).
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.

Checking a Preset Recording

You can check your preset recordings:
When you have finished presetting the DVD-VCR
If you have forgotten which programmes will be
recorded
1
Press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press the OK button to select
Standard
option.
Result:
The
TIMER PROGRAMMING
menu is displayed.
3
Press the
or
buttons to select the required programme.
4
Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
5
On completion, press RETURN twice.

Cancelling a Preset Recording

You can cancel any programmes that are:
Incorrect
No longer required
1
Press TIMER on the remote control.
Result:
The timer selection is displayed.
2
Press the OK button to select
Standard
option.
Result:
The
TIMER PROGRAMMING
menu is displayed.
3
Select the programme to be cancelled by pressing the
buttons.
4
Press the CLEAR button to cancel the selected programme.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
5
On completion, press RETURN twice.
VCR
PR
Date
Start
End
Speed
V/P
WE 1
19 : 00 19 : 30
SP
Off
:
:
:
:
:
:
:
:
VCR
PR
Date
Start
End
Speed
V/P
WE 1
19 : 00 19 : 30
SP
Off
:
:
:
:
:
:
:
:
or
4
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sv-dvd50Sv-dvd55

Table of Contents