Playing A Sequence Frame By Frame; Playing A Sequence At Variable Speeds; Searching For A Specific Sequence - Samsung SV-DVD40 Instruction Manual

VCR

Playing a Sequence Frame by Frame

You can:
Stop the cassette at a given frame (image)
Advance one frame at a time
No sound is heard when playing back frame by frame.
1 Press:
❿
1
❿
F.ADV/STEP (
2
To return to normal playback, press
Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the TRK
(
VCR

Playing a Sequence at Variable Speeds

You can vary the playback speed using the Shuttle function (up to
nine times the normal speed).
Example: You wish to analyze a sportsperson's technique,
movement by movement.
The Shuttle function is available on the Remote control
No sound is heard when playing a sequence at variable
speeds.
1
Press:
1 1
❿
SHUTTLE (<<) to play the cassette backwards
SHUTTLE (>>) to play the cassette forwards
2
Each time you press a SHUTTLE button, the speed is changed as
shown in the following illustration.
REVERSE REVERSE REVERSE
PLAY PLAY
X9 X5
40
ll to start playing the cassette
ll button one more time to make still mode.
) to advance frame by frame
❿
ll.
) buttons to minimize this effect.
,
ll during playback
SLOW SLOW PLAY PLAY PLAY
PLAY RPLAY STILL MOTION MOTION PLAY 2PLAY X3 X5 X9
X3 X1/10 X1/5

Searching for a Specific Sequence

Each time you record a cassette on this DVD-VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:
Prev Seq. being Next
etc. Seq. played Seq. etc.
2 1 1 2
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
Go to 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1
After pressing the SEARCH, press the corresponding
buttons, until the Go to (0:00:00) option is selected.
2 Press the OK or ❿.
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1
After pressing the SEARCH, press the corresponding
buttons, until the End Search option is selected.
2 Press the OK or ❿.
VCR
OK
or
❷
or
❷
41