Parental; A/V Receiver Connections - Samsung SV-DVD40 Instruction Manual

DVD

Parental

Rating Control is a password protected system that allows you to
block playback of DVDs based on their content. The system uses an
eight level rating system.
Setup • If you try to play a DVD that exceeds the selected rating, an error
Setup
message will appear.
Display Setup
Setup : • Not all discs are rated.
. 1 Open "MENU"
. With the DVD in stop mode, press the MENU button.
2 Select "DVD"
Use the
Parental Setup
then press the OK or
No
Use Password : No
Yes
3 Select "Parental Setup"
Highlight "Parental Setup", then press the OK or
.
4 Select "Use Password"
Highlight "Use Password," then press OK
of the following options:
• No - Indicates that no password is required to view any DVD
disc or to change Rating Control options. No additional Rating
Control settings are necessary.
• Yes – Indicates that a password is required to view some DVD
discs and to view Rating Control options. The menu will change
as shown.
NOTES:
• The first time "Use Password" is set to "Yes," you will be
prompted to enter a new password.
• If the "Enter Password" screen appears, then "Use Password"
~
Password" has already been set to "Yes." Please skip to Step 5.
5 Enter Password
Enter a 4-digit password using the 0–9 buttons on the remote
Yes
control.
• Write your password down, and keep it in a safe place in case
you need it to change your settings later.
6 Select "Rating Level"
Move the selection bar to "Rating Level," then press OK or
select.
7 Change Rating Level
Use the
• Level 8 Adult
• Level 7
• Level 6
• Level 5
All ratings above the level you select will also be blocked, e.g., if
you block Level 6, then Levels 7 and 8 will also be blocked.
Press OK or
• If you forgot your password, press power on from a RESET
with no disc in the unit. Press the
simultaneously on the front panel for 5 seconds. The "Reset ok"
message will appear. Press the STANDBY/ON button.
54
or buttons to highlight "DVD "
❷
❿
buttons.
❿
buttons.
or ❿
button to select one
❿
to
or buttons to select one of the following ratings:
❷
• Level 4
• Level 3
• Level 2
• Level 1 Kids Safe
❿
button to confirm your selection.
➛ ➛ and ❿ ❿ buttons

A/V Receiver Connections

To take full advantage of the movie theater experience that DVD
offers, you may want to connect your DVD-VCR to a complete
Surround Sound system, including an A/V Receiver and six
Surround Sound speakers.
Before You Begin...
• If your A/V receiver is equipped with a Dolby Digital Decoder,
you have the option to bypass the DVD-VCR's built-in Dolby
Digital Decoder. Use the DIGITAL AUDIO OUT connection
below.
1 Digital Audio Out
Connect EITHER an optical cable OR a digital coaxial cable from
the DIGITAL AUDIO OUT jacks on the back panel of the DVD-VCR
to their corresponding Digital Audio Input jacks on your A/V
Receiver:
• Optical (SV-DVD50/SV-DVD55)
• Coaxial
• Use whichever connection is available on your A/V Receiver.
DVD
OR
To Digital Audio Input of an A/V
Receiver with a Dolby Digital
Decoder
55