Playing A Disc - Samsung DVD-SH855M Instruction Manual

Discs that cannot be played
•
DVD-Video with a region number other than "2" or "ALL"
•
3.9 GB DVD-R Disc for Authoring.
•
DVD-RAM/-RW(VR mode) not recorded following the Video Recording
Standard
•
A DVD±R/DVD-RW(V) disc which has been recorded and not fi nalised in
a diff erent manufacturer's recorder.
•
DVD-ROM/PD/MV-Disc, etc
•
VCD/SVCD/CVD/CD-ROM/CDV/CD-G/CD-I
•
BD, HD-DVD
M

This HDD & DVD Recorder can only operate with discs that are
compatible with DVD-RAM Standard Version 2.0.

Playback and/or recording may not work for some types of discs, or
when specifi c operations, such as angle change and aspect ratio
adjustment, are being performed. Information about the discs is
written in detail on the box. Please refer to this if necessary.

Do not allow the disc to become dirty or scratched, fi nger prints,
dirt, dust, scratches or deposits of cigarette smoke on the recording
surface may make it impossible to use the disc for recording.

DVD-RAM/±RW/±R discs may not be able to play on some DVD
players, depending on the player, disc and the condition of the
recording.

Discs with NTSC programmes recorded on them can be played but
cannot be recorded using this product.

Playing a Disc

1. Press the OPEN/CLOSE button.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press the OPEN/CLOSE button to close the disc tray.
•
The HDD & DVD Recorder does not play discs automatically after
being powered on initially.
•
When the HDD & DVD Recorder is powered on and a disc is in the
tray, the unit will be activated and wait in stop status.
•
Press the PLAY( ) button to start playback.
4. Press the STOP( ) button to stop playback.
M

When you stop playing back a disc, the HDD & DVD Recorder
remembers where you stopped, so when you press PLAY(
button again, it will pick up where you left off . (Unless the disc is
removed or the HDD & DVD Recorder is unplugged, or if you press
the STOP( ) button twice.)
English - 45
)