Panel Lock; Auto Convection Conversion; Temperature Offset; Meat Probe - Thermador Professional Series Use And Care Manual

To deactivate the function before it has finished, touch
▯
the FAST PREHEAT touch button.
Activating the "Fast Preheat" function
Set a heating mode and temperature.
1.
Touch the FAST PREHEAT touch button to activate the
2.
function.
The symbol appears on the display.
°
Once the set temperature has been reached, the
3.
"Fast Preheat" function switches itself off automatically.
The symbol disappears from the display. Place the
°
food in the oven cavity.

Panel Lock

Your appliance is equipped with a panel lock so that it
cannot be switched on or a setting cannot be changed
accidentally.
Activating and Deactivating
The appliance has to be turned off.
Touch and hold the TIMERS touch button for
1.
approximately 4 seconds until "Panel Lock activated"
is displayed. The lock is activated. The
displayed in the top left corner of the display.
Touch and hold the TIMERS touch button for
2.
approximately 4 seconds until "Panel Lock
deactivated" is displayed.
The lock is deactivated.

Auto Convection Conversion

True Convection and Convection Bake modes require a
25° F (10 °C) reduction in temperature. Auto Convection
Conversion reduces the temperature you enter
automatically.
Enter the package or recipe temperature when setting
the mode. The oven control calculates the correct
temperature for these modes automatically by reducing
the input temperature by 25° F (10 °C). This is then
shown in the display.
To turn on this feature:
Ensure the oven is turned off.
1.
Press the SETTINGS touch button.
2.
Scroll over to Conv. Conversion.
3.
Touch the bottom of the screen and select ON.
4.
Touch the top of the screen.
5.
Press the SETTINGS touch button again to accept.
6.
Select "Save" to save your settings.
7.

Temperature Offset

This feature is useful if food is consistently either too
brown or too light. The setting increases or decreases
the set oven temperature according to the chosen value.
The following heating modes support this functionality:
Bake
▯
Convection Bake
▯
Roast
▯
Convection Roast
▯
True Convection
▯
Note: The oven is carefully calibrated to provide
accurate results. This feature is useful if you prefer your
foods darker or lighter.
Refer to the section entitled "Adjusting Basic Settings" to
apply a temperature offset.
Note: For double ovens you can set a different
temperature offset for each oven cavity.

Meat Probe

Your oven comes with a multi-point meat probe. This
probe measures the temperature in three different areas
of your food ensuring the most accurate cooking results.
Once the set temperature has been reached, the
appliance automatically switches itself off.
Suitable Heating Modes
True Convection
▯
Convection Bake
▯
Bake
▯
Convection Roast
symbol is
1
▯
Roast
▯
Slow Roast
▯
Notes
The meat probe measures the temperature on the
▯
inside of the food between 85° F (30 °C) and 210° F
(99 °C).
Use only the meat probe supplied with your appliance.
▯
Additional or replacement meat probes can be
ordered as a spare part from Customer Service.
After use, always remove the meat probe from the
▯
oven cavity. Never store it inside the oven cavity.
Inserting the Meat Probe into the Food
Before placing your food into the oven cavity, insert the
meat probe into the food.
The meat probe has three measuring points. Ensure that
the middle measuring point is inserted in the food.
Meat: For large pieces of meat, insert the meat probe at
an angle from above as far as it will go into the meat.
For relatively thin pieces of meat, insert the meat probe
from the side at the thickest point.
‚
¶
ƒ
þ
ü
ÿ
19