Setting A Heating Mode; Changing Or Cancelling The Appliance Operation; Fast Preheat - Thermador Professional Series Use And Care Manual

Checking, changing or deleting settings
Touch the TIMERS touch button.
1.
The time-setting options are shown in the display.
Touch the required timer option.
2.
Swipe to the left or right on the touch display to
3.
change the settings.
To delete a timer value, set "00:00", or touch
"Cancel".

Setting a Heating Mode

Use the function selector and temperature selector to set
the operating mode and temperature.
Use the touch buttons and the touch fields on the touch
screen to enter the different operating menus.
Example: True Convection with 325° F (160 °C)
Turn the function selector to TRUE CONV to switch on
1.
the appliance.
You go directly to the True Convection mode.
Turn the temperature selector to the required
2.
temperature.
After a few seconds the appliance starts operating.
3.
For heating modes that require a preheat the status
bar appears in the display to indicate the preheating
progress.
When the appliance has reached the set temperature,
4.
"Oven preheated" is displayed and an audible signal
sounds. The oven continues cooking with the set
temperature.
Preheating Bar
18
As soon as a new heating mode is started, the
preheating bar appears on the display. The preheating
bar indicates the temperature increase in the oven cavity.
When the oven is fully preheated, a sound signal will
occur.
INFO Touch Button
If the INFO touch button lights up, important information
regarding the mode you are using is available. This may
include for example recommendations on suitable
cookware or how to prepare food for a safe cooking
result. When you touch the INFO touch button, the
information is displayed for a few seconds.
To exit the INFO text immediately, touch the INFO touch
button or the display.
Sounds
The appliance uses various sound signals during
operation. A sound signal can be heard whenever you
use a touch button or touch field, or when an operation is
started or finished. You can adjust the volume of these
sounds in the Settings menu. ~ "Adjust Basic Settings"
on page 15
Changing or Cancelling the Appliance
Operation
Changing the appliance operation
To set a different temperature or a different heating
1.
mode use the temperature or function selectors.
To change any other settings, touch the display area
2.
for the setting that should be changed.
Swipe to the left or right to change the setting.
3.
After a few seconds the oven continues with the
4.
changed settings.
Note: The cooling fan may continue to run while an
operation is interrupted.
Cancelling the appliance operation
Turn the temperature selector and the function selector
to OFF to cancel the appliance operation.

Fast Preheat

With "Fast Preheat", you can shorten the preheat time
required for some heating modes.
Fast Preheat is available for the following modes:
True Convection
▯
Convection Bake
▯
Bake
▯
Roast
▯
Convection Roast
▯
To achieve an even cooking result, do not place your
food or accessories into the oven cavity until
"Fast Preheat" is complete.
Notes
If the FAST PREHEAT touch button is lit, the function
▯
can be activated.