Product Specification And Certification; Table 3 Digitron Product Specification And Certification - Siemens DigiTRON Series Installation, Operation And Maintenance Manual

Single connectors
Table of Contents

Advertisement

2.2

Product specification and certification

Basic specifications relating to all products covered by this manual are below in Table 3. Additional
specifications can be found in section 5.
Design Life:
Rated voltage
Rated current
Over-current
Rated number of
operations
Water depth
Storage temperature
Operational temp
Product Certification:
Standard
EU Directive
2001/95/EC
EU Directive
2014/35/EU
IEC 61984
API-17F
Note: Self-certified via in-house testing.
Unrestricted
30 years in subsea environment
+
DigiTRON
1,000Vac pin-ground, 2,000Vac pin-pin
e
DigiTRON
Ethernet lines 50Vdc, other lines as DigiTRON+
DigiTRON3
1,800Vac pin-ground, 2,000Vac pin-pin
In water: 4-way 35-40A 7-way 22-32A 12-way 20-28A
In air:
4-way 18A
(Excludes ethernet lines)
100A for 5 seconds, no more than 2 per hour
1000 (750dry/250wet) mate / de-mate cycles (Power off)
4,000 m (13,123ft)
-40°C +70°C (-40°F +158°F) (upper limit is surface temperature of the
product and includes solar gain from bright sunlight)
Subsea: -5°C +60°C (+23°F +140°F)
In air: -20°C +50°C (-4°F +122°F)
Description
General Product Safety
Low Voltage Directive
Connectors - Safety requirements and tests
Standard for Subsea Production Control Systems
Table 3
DigiTRON product specification and certification
7-way 14A
12-way 11A
Document No: IOM-002
Issue Date:
24/09/2020
Revision:
6
Page:
7 of 42

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digitron+DigitroneDigitron3

Table of Contents