Specifications; Connector Specification - Siemens DigiTRON Series Installation, Operation And Maintenance Manual

5

SPECIFICATIONS

The following is a basic specification for DigiTRON connectors. Actual product may vary. Please
refer to product specific data sheet(s), website
contact Siemens Energy Technical Support
for more detailed information.
General specification of the product is listed in section 2.2. Additional specifications are as follows.
5.1

Connector Specification

Misalignment
Type
Rotational (0º)
Radial
Angular
Mate force
Demate force
Overload
withstand
Axial load
Bending load
Torsion load
Maximum mate /
de-mate speeds
Limit of exposure of male pins to seawater 28 days cumulative over lifetime
Unrestricted
ROV operated
4 & 7-way 12-way
±15º ±15º
±20mm ±20mm
(0.787") (0.787")
±20º ±20º
<300N <500N
(67 lb) (112 lb)
240 – 360N
480-800N
(54 – 81 lb)
(108 - 179lb)
9800N 9800N
(2,198 lb) (2,198 lb)
500Nm 500Nm
(369 lbf.ft) (369 lbf.ft)
500Nm 500Nm
(369 lbf.ft) (369 lbf.ft)
1 m/s 1 m/s
(3.3 ft/s) (3.3 ft/s)
Table 5 DigiTRON connector specification
https://www.siemens-energy.com
connectortechnicalsupport.gb@siemens-energy.com
Stab-plate
4 & 7-way 12-way
±1.6º ±1.6º
±1mm ±1mm
(0.039") (0.039")
±0.7º ±0.7º
<300N <500N
(67 lb) (112 lb)
0
9800N 9800N
(2,198 lb) (2,198 lb)
n/a
n/a
1 m/s 1 m/s
(3.3 ft/s) (3.3 ft/s)
Document No: IOM-002
Issue Date:
Revision:
Page:
/search Subsea, or
Diver operated
4 & 7-way 12-way
n/a
n/a
n/a
Integral clamp ring
0 0
n/a
n/a n/a
n/a n/a
1 m/s
(3.3 ft/s)
24/09/2020
6
18 of 42
n/a
n/a
n/a
0
n/a
n/a
n/a
1 m/s
(3.3 ft/s)