Figure 11 Typical Bulkhead Rov Connectors; Figure 12 Rov Bulkhead Connector Sectional View - Siemens DigiTRON Series Installation, Operation And Maintenance Manual

Install 'O' rings
Installation of compliant flange mounted connector
Refer to Figure 13 for a typical flange-mounted ROV connector, and Figure 14 for installation
diagram.
Remove M6 mounting screws and orientation disc, pass the front of the connector through the
interface, install 4 off M6 mounting screws and orientation disc, secure screws with a spot of Loctite
243 on the threads and torque to 10-12 Nm (7.38 – 8.85 lbf.ft).:
Unrestricted
Figure 11 Typical bulkhead ROV connectors
Acetal flange
Figure 12 ROV bulkhead connector sectional view
Document No: IOM-002
Issue Date:
Revision:
Page:
Mounting screws
24/09/2020
6
27 of 42