Basic Information & Quick Reference; Product Overview; Digitron Product Range; Table 2 Digitron Product Range Identification - Siemens DigiTRON Series Installation, Operation And Maintenance Manual

Single connectors
Table of Contents

Advertisement

2
BASIC INFORMATION & QUICK REFERENCE
2.1

Product overview

DigiTRON connectors intended use is to provide low voltage and communications links between
pieces of electrical equipment that are submerged in water, e.g. subsea.
The DigiTRON range of connectors have been developed for long term reliable communications and
low voltage power control system applications associated with offshore installations. The underwater
mateable capacity of these connectors is achieved using pressure compensated electrical inserts
employing the CE principle.
Examples of connectors are shown in section 2.7.
Table 2 identifies each product type in the DigiTRON product range.
The products look very similar, so it is important to note the identifier for each product type.
Product
range
4, 7, and 12 pins
+
DigiTRON
Voltage rating
1kV pin-ground
2kV pin-pin
e
12 pins only.
DigiTRON
As DigiTRON+, but
with 4 or 8 of the pins
wired with ethernet
cable**.
DigiTRON3
4 pin only.
Voltage rating 1.8kV
pin-ground / 3.6kV
pin-pin
* Occasionally different coloured cones may be fitted, as specified by the customer, e.g. red,
green, yellow. In this case also check the part number to identify the product range
** Wiring diagram on the drawing will show how the product is wired. Contact Siemens Technical
Support for this information
Unrestricted
Description
White-coloured cone* or disc
on ROV connectors.
No visual identifier on Stab or
Diver type connectors
White-coloured cone* or disc
on ROV connectors.
No visual identifier on Stab or
Diver type connectors
Blue-coloured cone* or disc
on ROV connectors.
Blue-coloured sleeve on Stab
and Diver type connectors
connectortechnicalsupport.gb@siemens-energy.com
Table 2
DigiTRON product range identification
Visual identifier
Document No: IOM-002
Issue Date:
24/09/2020
Revision:
6
Page:
6 of 42
Typical part number
(etched on the
connector)
BROV-........
BRSP- .......
BSTA- .........
BSSP- .......
BDIV- ........
BDSP- .......
EROV-........
ERSP- .......
ESTA- .........
ESSP- .......
EDIV- ........
EDSP- .......
D3RV- .......
D3ST- .......
D3DV- ......
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Digitron+DigitroneDigitron3

Table of Contents