Hydraulic Jack - Mercedes-Benz Sprinter Operating Instructions Manual

220 Breakdown assistance
Unlocking and removing the stowage com‐
partment cover
Remove the rubber mat from the front-
#
passenger footwell.
To unlock: turn the quick-release fastener
#
counter-clockwise to position 1.
Slightly raise and pull out the cover.
#
Inserting and locking the cover
Slide in the cover and press it downwards.
#
Press down the quick-release fastener
#
until it engages.
To lock: turn the quick-release fastener
#
clockwise to position 2.
Removing the vehicle tool kit
Example: vehicle tool kit insert
Raise the insert at marked points 1.
#
Pull the insert out of clips 2.
#
Storing the vehicle tool kit
Slide the insert into clips 2.
#
Close the insert by pressing on marked points
#
1.

Hydraulic jack

Information on the hydraulic jack
1
The hydraulic jack is located in side compartment
1 above the co-driver door step.
1
The jack has a maximum weight of 16.5 lbs
(7.5 kg) depending on the vehicle's equipment.
You will find the maximum load capacity of the
1
jack stated on the adhesive label attached to the
jack. If there is a malfunction, please contact a
qualified specialist workshop.
Jack maintenance:
Clean and grease all moving parts after use.
R
Extend and retract the pistons fully every six
R
months.