Placing A Load On The Wheel Arch - Mercedes-Benz Sprinter Operating Instructions Manual

Hide thumbs Also See for Sprinter:
Table of Contents

Advertisement

Turn the ring of cargo tie-down ring
#
is parallel to the longitudinal axis of cargo tie-
down ring C.
Hold cargo tie-down ring
#
index finger and middle finger and place your
thumb through the ring of cargo tie-down ring
B
and onto the central pressure point.
Use your thumb to push the locking pin down
#
as far as it will go.
Push cargo tie-down ring
#
through the notches on rack rail
it approximately 0.5 in (12 mm).
Remove your thumb from the pressure point
#
and slide cargo tie-down ring
engages.
Turn the ring of cargo tie-down ring
#
is perpendicular to the longitudinal axis of
cargo tie-down ring C.
Cargo tie-down ring
Removing cargo tie down rings
Turn the ring of cargo tie-down ring
#
is parallel to the longitudinal axis of cargo tie-
down ring C.
Grip cargo tie-down ring
#
above under installing and use your thumb to
push the locking pin down as far as it will go.
Slide cargo tie-down ring
#
and out through the notches of rack rail 2.
Attaching the head lashing
& WARNING Risk of injury due to incor‐
rectly secured loads
When the hooks on the head lashing are
attached to the rings of the sliders, the slid‐
ers could come loose. The load may come
loose, fall down and injure people, for
instance when they enter or load and unload
the cargo compartment.
Only attach the hooks on the head lash‐
#
ing to the rings of the cargo tie-down
rings.
B
until it
C
between the
C
near the load
2
and move
C
until it
B
until it
C
is secured.
B
until it
C
as described
C
and pull it down
%
The hooks on head lashing
attached to the rings of cargo tie down rings
B.
Check that the load is seated securely.
#
To attach the head lashing: tension head
#
lashing
3
at both ends of load
attach two hooks
A
the rings of cargo tie down rings B.

Placing a load on the wheel arch

Comply with the important safety notes under
"Notes on loading" (
/
Place the objects on wheel arch
#
them using tie-down eyes 1(
%
A wheel arch may be subjected to a load of
330 lb (150 kg).
Transporting 191
3
may only be
6
and
of the head lashing to
page 185).
2
and lash
page 187).
/

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents