Appendix D Wall-Mounting Instructions; Figure 128 Wall-Mounting Example - ZyXEL Communications ZyXEL NBG334SH User Manual

A
P P E N D I X
Wall-mounting Instructions
Do the following to hang your ZyXEL Device on a wall.
See the product specifications appendix for the size of screws to use and how
far apart to place them.
1 Locate a high position on a wall that is free of obstructions. Use a sturdy wall.
2 Drill two holes for the screws. Make sure the distance between the centers of the holes
matches what is listed in the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the wall when
drilling holes for the screws.
3 Do not screw the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the ZyXEL Device with the connection cables.
5 Align the holes on the back of the ZyXEL Device with the screws on the wall. Hang the
ZyXEL Device on the screws.

Figure 128 Wall-mounting Example

ZyXEL NBG-334SH User's Guide
D
221