Lan Ip Screen; Lan Ip Alias; Figure 56 Lan Ip; Table 36 Lan Ip - ZyXEL Communications ZyXEL NBG334SH User Manual

Chapter 7 LAN

7.3 LAN IP Screen

Use this screen to change your basic LAN settings. Click Network > LAN.

Figure 56 LAN IP

The following table describes the labels in this screen.

Table 36 LAN IP

LABEL
LAN TCP/IP
IP Address
IP Subnet Mask
Apply
Reset

7.4 LAN IP Alias

IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The ZyXEL Device supports three logical LAN interfaces via its
single physical Ethernet interface with the ZyXEL Device itself as the gateway for each LAN
network.
To change your ZyXEL Device's IP alias settings, click Network > LAN > IP Alias. The
screen appears as shown.
102
DESCRIPTION
Type the IP address of your ZyXEL Device in dotted decimal notation
192.168.1.1 (factory default).
The subnet mask specifies the network number portion of an IP address. Your
ZyXEL Device will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the ZyXEL Device.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to begin configuring this screen afresh.
ZyXEL NBG-334SH User's Guide