Appendix A Product Specifications; Table 91 Hardware Features; Table 92 Firmware Features - ZyXEL Communications ZyXEL NBG334SH User Manual

A
P P E N D I X
The following tables summarize the ZyXEL Device's hardware and firmware features.

Table 91 Hardware Features

Dimensions (W x D x H)
Power Specification
Ethernet ports
4-Port Switch
Reset Button
Antenna
Operation Temperature
Storage Temperature
Operation Humidity
Storage Humidity
Distance between the
centers of the holes on
the device's back.
Screw size for wall-
mounting

Table 92 Firmware Features

FEATURE
Default IP Address
Default Subnet Mask
Default Password
DHCP Pool
Device Management
ZyXEL NBG-334SH User's Guide
Product Specifications
190 x 128 x 33 mm
12 V AC 1 A
Auto-negotiating:
This auto-negotiation feature allows the ZyXEL Device to detect the speed
of incoming transmissions and adjust appropriately without manual
intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either
half-duplex or full-duplex mode depending on your Ethernet network.
Auto-crossover:
Use either crossover or straight-through Ethernet cables.
A combination of switch and router makes your ZyXEL Device a cost-
effective and viable network solution. You can add up to four computers to
the ZyXEL Device without the cost of a hub. Add more than four computers
to your LAN by using a hub.
The reset button is built into the rear panel. Use this button to restore the
ZyXEL Device to its factory default settings.
The ZyXEL Device is equipped with a 2dBi fixed antenna to provide clear
radio transmission and reception on the wireless network.
0º C ~ 50º C
-20º C ~ 60º C
20% ~ 95% RH
10% ~ 90% RH
125 mm
M 3*10
DESCRIPTION
192.168.1.1
255.255.255.0 (24 bits)
1234
192.168.1.33 to 192.168.1.64
Use the web configurator to easily configure the rich range of features on
the ZyXEL Device.
A
203