Table of Contents
Advertisement
Chapter 5 Wireless LAN
Table 28 MAC Address Filter
LABEL
Set
MAC
Address
Apply
Reset
5.6 Wireless LAN Advanced Screen
Click Network > Wireless LAN > Advanced. The screen appears as shown.
Figure 48 Wireless LAN Advanced
The following table describes the labels in this screen.
Table 29 Wireless LAN Advanced
LABEL
Wireless Advanced Setup
RTS/CTS
Threshold
Fragmentation
Threshold
Output Power
84
DESCRIPTION
This is the index number of the MAC address.
Enter the MAC addresses of the wireless station that are allowed or denied access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Click Apply to save your changes back to the ZyXEL Device.
Click Reset to reload the previous configuration for this screen.
DESCRIPTION
Data with its frame size larger than this value will perform the RTS (Request To
Send)/CTS (Clear To Send) handshake.
If the RTS/CTS value is greater than the Fragmentation Threshold value, then the
RTS/CTS handshake will never occur as data frames will be fragmented before they
reach RTS/CTS size.
Enter a value between 0 and 2432.
It is the maximum data fragment size that can be sent. Enter a value between 256
and 2432.
Set the output power of the ZyXEL Device in this field. If there is a high density of
APs within an area, decrease the output power of the ZyXEL Device to reduce
interference with other APs.
ZyXEL NBG-334SH User's Guide
Advertisement
Table of Contents
Troubleshooting
