P1600 Main Menu - Primary; Chapter 12 System Security; Figure 3-3 Primary Main Menu; Table 3-2 Main Menu Summary - ZyXEL Communications Prestige 1600 Configuration Manual

Prestige 1600 Universal Access Concentrator
3.3.1

P1600 Main Menu - Primary

The SMT displays a general Main Menu first. Once you configure the system in Menu 1 - General Setup you can
see the P1600 primary Main Menu, as shown next.
Getting Started
1. General Setup
2. WAN Setup
3. Ethernet Setup
4. Internet Access Setup
6. Port Setup
Advanced Applications
11. Remote Node Setup
12. Static Routing Setup
15. NAT Setup
Enter Menu Selection Number:
The following table shows the Main Menu Summary,
#
1 General Setup
2 WAN Setup
3 Ethernet Setup
4 Internet Access Setup A quick and easy way to set up an Internet connection for the
6 Port Setup
11 Remote Node Setup
12 Static Routing Setup
15 NAT Setup
21 Filter Set Configuration Set up filters to be applied in Menu 3 and Menu 11 to provide
22 SNMP Configuration
23 System Security
24 System Maintenance
25 IP Routing Policy Setup Configure your routing policies here.
3-4
Copyright (c) 2000 ZyXEL Communications Corp.
Prestige 1600 Main Menu (MyPrimary)

Figure 3-3 Primary Main Menu

Table 3-2 Main Menu Summary

Menu Title
Use this menu to set up general information and enable routing
or bridging of specific protocols. The name in brackets after
Main Menu is the System Name you assign here.
Use this menu to set up the WAN configuration.
Use this menu to set up the Ethernet configuration.
primary 1600.
Use this menu to configure DSL port parameters and to choose
authentication options.
Use this menu to set up the remote node for LAN-to-LAN
connections, including an Internet connection for the primary
and standalone models.
Use this menu to set up static routes for different protocols.
There are eight static routes for each protocol.
Use this menu to configure NAT
security, call control, etc.
Use this menu to set up SNMP related parameters
Use this menu to set up security related parameters.
Provides system status, diagnostics, firmware upload, etc.
Advanced Management
21. Filter Set Configuration
22. SNMP Configuration
23. System Security
24. System Maintenance
25. IP Routing Policy Setup
99. Exit
Description
.
Initial Setup