Display A Sonar View On-Screen - Humminbird HELIX Series Operation Manual

Display a Sonar View On-Screen

There are a variety of views available to display sonar data. You can customize the view by showing or hiding information (see
Customize the Sonar View), and you can adjust the sonar settings to refine the information displayed on-screen (see Adjust Sonar
Display Settings and Adjust Settings While you Fish). The changes you make are applied to all traditional 2D sonar views.
Display a Sonar View
1. Press and hold the VIEW key.
2. Select Sonar > Sonar View, Sonar Zoom View, Split Sonar View, etc.
Sonar View
Big Digits View
NOTE: The available views are determined by your control head model and the installed transducer. For a complete list of the
views available on your control head, press the MENU key twice, and select the Views tab. See each related section of the manual
(Views, Down Imaging, Side Imaging, Navigation Overview, etc.) for more information.
Sonar (2D)
Sonar Zoom View
For more information, see
Review Sonar History and Zoom In/Zoom Out.
Flasher View (ICE HELIX CHIRP)
For more information, see
Display the Flasher View On-Screen.
50
Split Sonar View
For more information, see
Compare Sonar Beams.