Humminbird HELIX Series Operation Manual page 229

Change the Display Language
The available languages are determined by your Humminbird model.
WARNING! Do NOT enable Asian Mode if you do not require Asian languages. Before you select Asian Mode, contact Technical
Support for important information.
1. Main Menu: Press the MENU key twice. Select the Setup tab.
2. Select Language.
3. Press the RIGHT or LEFT Cursor keys to select a language.
Change Digital Readout Formats
Use the following instructions to customize the format for the digital readouts displayed on the control head. See Views: Display
Digital Readouts for more information.
Change the Digits Format
If you have Digital Readouts set to Boxes, you can change how the numbers are displayed.
HELIX G3/G3N and older
1. Main Menu (Custom User Mode): Press the MENU key
twice. Select the Setup tab.
2. Select Digits Format.
3. Press the RIGHT or LEFT Cursor keys to select a format.
Change Units of Measurement
HELIX G3/G3N and older
1. Main Menu: Press the MENU key twice. Select the Setup
tab.
2. Select Units - Depth, Units - Distance, etc., and adjust
each unit setting as needed.
3. Close: Press the EXIT key.
NOTE: The Units - Temp menu is only available in an
international model.
HELIX G4N
1. Main Menu (Custom User Mode): Press the MENU key
twice. Select the Data Sources tab.
2. Select Digits Format.
3. Press the RIGHT or LEFT Cursor keys to select a format.
HELIX G4N
1. Main Menu: Press the MENU key twice. Select the Data
Sources tab.
2. Select Units and press the RIGHT Cursor key to open the
Units menu.
3. Select each unit as needed and use the RIGHT or LEFT Cursor
keys to adjust the setting.
4. Close: Press the EXIT key.
229
Manage your Control Head