Humminbird HELIX Series Operation Manual page 102

Adjust the Side Imaging Range
SI Range sets the deepest range that will be displayed on the Side Imaging views. Choose a low range number to focus on a shorter
distance of the water column and see greater detail on the view. Choose a higher range number to see farther into the water and
see an overview of details on the screen.
1. Side Imaging X-Press Menu: With a Side Imaging View displayed on-screen, press the MENU key once.
2. Select SI Range.
Auto: The Range will be adjusted by the control head to follow the bottom automatically.
Manual: The control head locks onto the depth you select.
Side Imaging units default to the Side Imaging range setting if the SI Range is set deeper than the Max Depth. See Set up Sonar
for more information.
Display Beams
Use SI Side to select which Side Imaging beam will be shown on the display.
left beam
label
Select Beams to Display on the View
1. Side Imaging X-Press Menu: With a Side Imaging View displayed on-screen, press the MENU key once.
2. Select SI Side.
3. Select a beam or both beams to display.
Side Imaging Sonar
Side Imaging View with the Left Beam Displayed
range lines
102
boat icon