Dismantling The Throttle Lockout, Throttle And Spring - Husqvarna T540 XP Workshop Manual

Safety equipment
6.9 Dismantling the throttle lockout,
throttle and spring
1
Release the chain brake by moving the kickback
guard backwards. Dismantle the clutch cover and
front hand guard. See the "Dismantling the muffler"
chapter.
2
Dismantle the handle half by loosening the screws
as outlined in Figure 24.
Fig 24
3
Slide the stop switch off its holder as outlined in
Figure 25.
Fig 25
4
Lift off the throttle lockout and the throttle from their
attachments in the handle. See figure 26.
Fig 26
5
Unhook the throttle cable and the recoil spring from
their attachments. See figure 27.
Fig 27
24
– English