Figure 6 Zyxel Utility: Site Survey; Figure 7 Zyxel Utility: Security Settings - ZyXEL Communications G-120 User Manual

ZyXEL G-120 User's Guide

Figure 6 ZyXEL Utility: Site Survey

2 The wireless client automatically searches for available wireless networks. Click Scan if
you want to search again. If no entry displays in the Available Network List, that means
there is no wireless network available within range. Make sure the AP or peer computer is
turned on, or move the wireless client closer to the AP or peer computer. See
page 40
3 To connect to an AP or peer computer, either click an entry in the list and then click
Connect or double-click an entry (with a SSID of SSID_Examples3 in this example).
4 When you try to connect to an AP with security configured, a window will pop up
prompting you to specify the security settings. Enter the pre-shared key and leave the
encryption type at the default setting.
Use the Next button to move on to the next screen. You can use the Back button at any
time to return to the previous screen, or the Exit button to return to the Site Survey
screen.

Figure 7 ZyXEL Utility: Security Settings

5 The Confirm New Settings window appears. Check your settings and click Save to
continue.
24
for detailed field descriptions.
Table 4 on
Chapter 2 Tutorial