Figure 27 Profile: Select A Channel; Table 12 Profile: Select A Channel - ZyXEL Communications G-120 User Manual

ZyXEL G-120 User's Guide

Figure 27 Profile: Select a Channel

The following table describes the labels in this screen.

Table 12 Profile: Select a Channel

LABEL
Wireless Settings
Channel
Wireless Mode
3 If you select Infrastructure network type in the first screen, select WEP, WPA-PSK,
WPA-RADIUS, WPA2-PSK, WPA2-RADIUS or RADIUS from the drop-down list
box to enable data encryption. If you select Ad-Hoc network type in the first screen, you
can only use WEP encryption method. Otherwise, select Disabled to allow the G-120 to
communicate with the access points or other peer wireless computers without any data
encryption and skip to step 5.
50
DESCRIPTION
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
This displays b+g and allows the G-120 to connect to either an IEEE 802.11g or
IEEE 802.11b wireless device.
Chapter 4 ZyXEL Utility Configuration