Step 3.
Now we configure our firewall rule as shown in the following screen. The default firewall
blocks all Internet traffic entering our local network, but we want to create a hole for web
service from the Internet. Go to the Rule Summary screen under the (click Internet).
Configure this screen as shown in Figure 19-3.
Step 4.
Click DestAdd to configure the destination address as the IP of our server on the LAN. See
Figure 19-4.
Step 5.
When you have finished configuring this screen, the Rule Summary screen should look like the
one inFigure 19-5.
Step 6.
Click Apply in this screen when you have finished configuring to save your configuration back
to the Prestige.
Example Firewall Rules
Figure 19-2
Example 1 – E-Mail Screen
P312 Broadband Security Gateway
Enter 10.100.1.2, the IP address of the
mail server here.
Enter a subject for
these e-mails here.
This is where we
send the alerts.
We want to send an alert at
this time.
19-3