P312 Broadband Security Gateway
LEDs
Function Indicator
WAN
WAN
2.2
Prestige 312 Rear Panel and Connections
The following figure shows the rear panel of your Prestige 312 and the connection diagram.
Figure 2-2
This section outlines how to connect your Prestige 312 to the LAN and the WAN. In the case of connecting
a Cable Modem you must connect the coaxial cable from your cable service to the threaded coaxial cable
2-2
Active
Status
Flashing
Green
Off
On
Flashing
Prestige 312 Rear Panel and Connections
Description
The 100M LAN is sending/receiving packets.
The WAN Link is not ready, or has failed.
The WAN Link is ok.
The 10M WAN link is sending/receiving packets.
Hardware Installation & Initial Setup