ZyXEL Communications 802.11g Wireless Firewall Router 1-P-320W Quick Start Manual page 18

PROBLEM
Cannot access the Mer
produkthjalp finns pa http://
www.support.zyxel.se from my
computer (continued).
Cannot access the Internet.
4.1 Set Up Your Computer's IP Address
This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.
This ensures that your computer can communicate with your Mer produkthjalp finns pa http://
www.support.zyxel.se. Refer to your User's Guide for detailed IP address configuration for other Windows and
Macintosh computer operating systems.
1 In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.
2 In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up
Connections.
3 Right-click Local Area Connection and then click Properties.
4 Select Internet Protocol (TCP/IP) (under the General tab in Win
XP) and click Properties.
5 The Internet Protocol TCP/IP Properties screen opens (the
General tab in Windows XP).
6 Select the Obtain an IP address automatically and Obtain
DNS server address automatically options.
7 Click OK to close the Internet Protocol (TCP/IP) Properties
window.
8 Click Close (OK in Windows 2000/NT) to close the Local Area
Connection Properties window.
9 Close the Network Connections screen.
Viewing Your Product's Certifications
1 Go to www.zyxel.com.
2 Select your product from the drop-down list box on the ZyXEL
home page to go to that product's page.
3 Select the certification you wish to view from this page.
ENGLISH
CORRECTIVE ACTION
Use Internet Explorer 6.0 and later or Netscape Navigator 7.0 and later with
JavaScript enabled.
Make sure you enter the password correctly (the field is case sensitive).
If you've forgotten the Mer produkthjalp finns pa http://www.support.zyxel.se's
password, use the RESET button. Press the button in for about 10 seconds (the
WAN light turns off and then on again), then release it. It returns the Mer
produkthjalp finns pa http://www.support.zyxel.se to the factory defaults
(password is 1234, LAN IP address 192.168.1.1 etc.).
Verify the Internet connection settings in the wizard. Make sure you entered the
correct user name and password if you are using PPPoE or PPPoA.
18