Comparison Function (In Ambient Light Mode Only) - Sekonic SPECTROMASTER C-7000 Operating Manual

5-5 Comparison Function (in Ambient Light Mode
only)
In all Display Modes (except Spectrum Comp.,
CIE1931/1964 Comp. and CIE1976 Comp. modes), when
you touch the Delta icon (
it changes to (
While this mode, the difference between preset reference
value and currently being measured value is displayed as
long as the Measuring Button
When the Measuring Button
reference value is displayed in the yellow letter.
Operation
1.
Touch the [Preset Selection (2°) (Preset Selection (10°))] button in
the Tool Box.
The Preset Selection screen will be displayed.
NOTICE
● A Preset value must be created and saved in the Preset Editing
function under the "Setting Mode" icon before use.
Preset Selection buttons will be grayed out until settings are created.
) in the Display mode,
)
is released.
5
is released, the preset
5
Tool Box Screen
5. Measuring Light Sources [Measurement Screen]
Preset Selection (2°) Screen
98
Measuring Button
5