Sekonic SPECTROMASTER C-7000 Operating Manual page 59

4.
Press the Measuring Button
The Light Selection Ring
when taking ambient light measurements.
When measuring flash units, select Range L
or Range H (
the flash. ( P102,  P103)
Measurements are now displayed.
NOTE
● Measurements and display will take longer in light levels below 30lx.
The LCD illumination will normally switch off during measurements to avoid
influence to measurements.
5.
The current measurement is displayed in the graph display area.
6.
Touch the [Select SSI Reference] icon.
The [Select SSI Reference Light] screen will be displayed.
[Select SSI
Reference] Icon
Current Measurement Graph (SSI)
❺
❷ should be set to L
) depending on the brightness of
SSI Screen
47
to measure.
Light Selection Ring
( )
( )
Measuring Button
Select SSI Reference Light
Screen
4. Basic Operations
❷
❺
Blue bar
indicates the
item selected.