Sekonic SPECTROMASTER C-7000 Operating Manual page 88

4.
Press the Measuring Button
The Light Selection Ring
when taking ambient light measurements.
When measuring flash units, select Range L
or Range H (
the flash. ( P102,  P103)
Measurements are now displayed.
NOTE
● Measurement and display will take longer in light levels below 30lx.
The LCD illumination will normally switch off during measurement to avoid
influence to measurement.
5.
The current measurement value is indicated by a black "x".
6.
Touch the [Memory Selection] icon.
The [CIE1931 (CIE1964) Comp.] screen will be displayed.
CIE1931 (CIE1964) Comp.
Current
Measurement
[Memory
Selection] Icon
❺
to measure.
❷
should be set to L
) depending on the brightness of
Measured value
CIE1931 (CIE1964) Comp. Memory
Screen
76
Light Selection Ring
( )
( )
Measuring Button
Screen
4. Basic Operations
❷
❺
Memory
Selection
Area