Troubleshooting - ZyXEL Communications ZyXEL ZyAIR B-220 Quick Installation Manual

11mbps wireless lan usb stick

Hide thumbs Also See for ZyXEL ZyAIR B-220:

PROBLEM

Windows does not

auto-detect the

ZyAIR.

C ertifica tions . F or more informa tion a bout your devices Decla ra tion of C onformity (DO C ) plea s e refer to www. z yxel. com

Troubleshooting

Make sure the ZyAIR USB connecter is inserted into the

computer USB port properly and then restart your computer.

Check the LED on the ZyAIR.

Perform a hardware scan by clicking Start, Settings, Control

Panel and double-clicking Add/Remove Hardware. (Steps

may vary depending on the version of Windows).

Follow the on-screen instructions to search for the ZyAIR and

install the driver.

Use the Device Manager window to check for possible

hardware conflicts.

Click Start, Settings, Control Panel, System, Hardware and

then click Device Manager. Verify the status of the ZyAIR

under Network Adapter. (Steps may vary depending on the

version of Windows).

Install the ZyAIR in another computer.

If the error persists, you may have a hardware problem. In this

case, you should contact your local vendor.

CORRECTIVE ACTION

Table of Contents