Methods Of Restoring Factory-Defaults; Navigating The Web Configurator; Figure 10 The Status Screen Of The Web Configurator - ZyXEL Communications ZyXEL NWA3550 User Manual

2.2.1 Methods of Restoring Factory-Defaults

You can erase the current configuration and restore factory defaults in the following ways:
• Use the web configurator to restore defaults (refer to
• Transfer the configuration file to your ZyXEL Device using FTP. See the section on SMT
configuration for more information.

2.3 Navigating the Web Configurator

The following summarizes how to navigate the web configurator from the Status screen.
• Click LOGOUT at any time to exit the web configurator.
• Check the status bar at the bottom of the screen when you click Apply or OK to verify
that the configuration has been updated.

Figure 10 The Status Screen of the Web Configurator

• Click the links on the left of the screen to configure advanced features such as MGNT
MODE (Standalone AP or Managed AP), SYSTEM (General, Password and Time
Setting), WIRELESS (Wireless, SSID, Security, RADIUS, Layer-2 Isolation, MAC
Filter), IP, ROGUE AP (Configuration, Friendly AP, Rogue AP), REMOTE MGNT
(Telnet, FTP, WWW and SNMP), AUTH. SERVER (Setting, Trusted AP, Trusted Users),
CERTIFICATES (My Certificates, Trusted CAs), LOGS (View Log and Log Settings)
and VLAN (Wireless VLAN and RADIUS VLAN).
• Click MAINTENANCE to view information about your ZyXEL Device or upgrade
configuration and firmware files. Maintenance features include Status (Statistics),
Association List, Channel Usage, F/W (firmware) Upload, Configuration (Backup,
Restore and Default) and Restart.
NWA3550 User's Guide
Chapter 2 Introducing the Web Configurator
Chapter 18 on page 221).
45