Wep Encryption; Figure 15 Security Settings: Wep; Table 6 Security Settings: Wep - ZyXEL Communications G-302 User Manual

3.2.2.1 WEP Encryption

Figure 15 Security Settings: WEP

The following table describes the labels in this screen.

Table 6 Security Settings: WEP

LABEL
WEP
Authentication
Type
Pass Phrase
Transmit Key
Key x (where x is a
number between 1
and 4)
Back
Chapter 3 ZyXEL Utility Configuration
DESCRIPTION
Select 64 Bits or 128 Bits to activate WEP encryption and then fill in the related
fields.
Select an authentication type. Choices are Open and Shared. Refer to
on page 29 for more information.
Enter a passphrase of up to 63 case-sensitive printable characters. As you enter
the passphrase, the G-302 v3 automatically generates four different WEP keys
and displays it in the key field below. Refer to
information.
At the time of writing, you cannot use passphrase to generate 152-bit WEP keys.
Select a default WEP key to use for data encryption. The key displays in the field
below.
Select this option if you want to manually enter the WEP keys. Enter the WEP key
in the field provided.
If you select 64 Bits in the WEP field.
Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 11AA22BB33) for HEX key type.
or
Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey) for ASCII key type.
If you select 128 Bits in the WEP field,
Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for
example, 00112233445566778899AABBCC) for HEX key type
or
Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9"
(for example, MyKey12345678) for ASCII key type.
Note: The values for the WEP keys must be set up exactly the
same on all wireless devices in the same wireless LAN.
ASCII WEP keys are case sensitive.
Click Back to go to the Site Survey screen to select and connect to other network.
ZyXEL G-302 v3 User's Guide
Section 2.3
Section 2.2.1 on page 26 for more
35