Wpa-Psk/Wpa2-Psk; Figure 17 Security Settings: Wpa-Psk/Wpa2-Psk; Table 8 Security Settings: Wpa-Psk/Wpa2-Psk - ZyXEL Communications G-302 User Manual

Table 7 Security Settings: WPA/WPA2
LABEL
PEAP Inner EAP
TTLS Inner
authentication
Back
Next
Exit

3.2.2.3 WPA-PSK/WPA2-PSK

Note: You can use WPA and WPA2 with the G-302 v3 only in Microsoft Windows XP
or Windows 2000.

Figure 17 Security Settings: WPA-PSK/WPA2-PSK

The following table describes the labels in this screen.

Table 8 Security Settings: WPA-PSK/WPA2-PSK

LABEL
Encryption Type
Pre-Shared Key
Back
Next
Exit
Chapter 3 ZyXEL Utility Configuration
DESCRIPTION
This field is only available when you select PEAP in the Authentication Type
field.
Select a PEAP protocol. Options are TLS and MS CHAP-V2.
This field is only available when you select TTLS in the Authentication Type field.
Select a TTLS protocol that the RADIUS server uses. Options are CHAP, MS
CHAP, MS CHAP-V2 and PAP.
Click Back to go to the Site Survey screen to select and connect to other network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 3.2.3 on page
Click Exit to return to the Site Survey screen without saving.
DESCRIPTION
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to Section 2.2.3 on page 27
Type a pre-shared key (same as the AP or peer device) of between 8 and 63 case-
sensitive ASCII characters (including spaces and symbols).
Click Back to go to the Site Survey screen to select and connect to other network.
Click Next to confirm your selections and advance to the Confirm Save screen.
Refer to Section 3.2.3 on page
Click Exit to return to the Site Survey screen without saving.
ZyXEL G-302 v3 User's Guide
38.
for more information.
38.
37