ZyXEL AG-220 User's Guide
Figure 29 Confirm Save Screen
The following table describes the labels in this screen.
Table 10 Confirm Save Screen
LABEL
Security Setting
Network Name
Network Type
Channel
Security
Back
Save
Exit
4.4 The Profile Screen
A profile is a set of wireless parameters that you need to connect to a wireless network. With a
profile activated, each time you start the AG-220, it automatically scans for the specific SSID
and joins that network with the pre-defined wireless security settings. If the specified network
is not available, the AG-220 cannot connect to a network.
If you do not configure and activate a profile, each time you start the AG-220, the AG-220
uses the default profile to connect to any available network that has no security enabled.
The default profile is a profile that allows you to connect to any SSID that has no security
enabled.
52
DESCRIPTION
This field displays the SSID previously entered.
This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
device.
This field displays the channel number used by the profile.
This field shows whether data encryption is activated (WEP (WEP or 802.1x),
WPA, WPA-PSK, WPA2, WPA2-PSK) or inactive (DISABLE).
Click Back to return to the previous screen.
Click Save to save the changes back to the AG-220 and display the Link Info
screen.
Click Exit to discard changes and return to the Site Survey screen.
Chapter 4 Wireless Station Mode Configuration