Trend Chart; Figure 23 Station Mode: Link Info: Trend Chart; Table 4 Station Mode: Link Info: Trend Chart - ZyXEL Communications G-220F User Manual

Table 3 Station Mode: Link Info (continued)
LABEL
Authentication
Network Mode
Total Transmit
Total Receive
Link Quality

Trend Chart

Signal Strength
Link Quality
4.2.1 Trend Chart
Click Trend Chart in the Link Info screen to display a screen as shown below. Use this
screen to view real-time data traffic statistics.

Figure 23 Station Mode: Link Info: Trend Chart

The following table describes the labels in this screen.

Table 4 Station Mode: Link Info: Trend Chart

LABEL
Transmit
Receive
Chapter 4 Wireless Station Mode Configuration
DESCRIPTION
This field displays the authentication method of the AG-220.
This field displays the wireless standard (A, B or G) of the AP or peer computer.
This field displays the total number of data frames transmitted.
This field displays the total number of data frames received.
This field displays the signal strength of the AG-220.
Click this button to display the real-time statistics of the data rate in kilobits per
second (Kbps).
The status bar shows the strength of the signal. The signal strength mainly
depends on the antenna output power and the distance between your AG-220 and
the AP or peer computer.
The status bar shows the quality of wireless connection. This refers to the
percentage of packets transmitted successfully. If there are too many wireless
stations in a wireless network, collisions may occur which could result in a loss of
messages even though you have high signal strength.
DESCRIPTION
This field displays the current data transmission rate in kilobits per second (Kbps).
This field displays the current data receiving rate in kilobits per second (Kbps).
ZyXEL AG-220 User's Guide
45