This chapter shows you how to configure your AG-220 in access point mode.
5.1 Access Point Mode Introduction
To set your AG-220 to access point (AP) mode, select AP Mode in any utility screen (refer to
Section 1.2.3 on page
Access point mode allows you to set up your wireless networks without using a dedicated AP.
5.1.1 ZyXEL Utility Screen Summary
This section describes the ZyXEL utility screens when the AG-220 is in AP mode.
Figure 39 ZyXEL Utility Menu Summary: AP Mode
The following table describes the menus.
Table 16 ZyXEL Utility Menu Summary: AP Mode
TAB
AP Mode
Link Info
Configuration
Advanced
MAC Filter
Chapter 5 Access Point Mode Configuration
Access Point Mode
23).
DESCRIPTION
Use this screen to see your current connection status, configuration and data rate
statistics.
Use this screen to configure wireless LAN settings.
Use this screen to change the wireless network mode.
Use this screen to configure which computer(s) you want access to the wireless
LAN through the AG-220.
ZyXEL AG-220 User's Guide
C
H A P T E R
Configuration
5
61