ZyXEL AG-220 User's Guide
Figure 42 Access Point Mode: Advanced
The following table describes the labels in this screen.
Table 19 Access Point Mode: Advanced
LABEL
Advanced Setting
Frequency
Save
5.5 The MAC Filter Screen
The MAC Filter screen allows you to configure the AG-220 to give exclusive access to
devices (Accept) or exclude devices from connecting to the AG-220 (Reject). The MAC
address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02. You need to know the MAC address of the device(s) to
configure this screen. See
66
DESCRIPTION
Choose a network mode. Select 802.11b+g to have your AG-220 connect to
other wireless devices in either IEEE 802.11 b or 802.11g modes.
Alternatively, select 802.11g, 802.11b or 802.11a to have your AG-220
connect to other wireless devices in b, g or a mode only.
Click Save to save the changes to the AG-220. If you are connected to a
wireless network when changing network modes, the AG-220 will disconnect
and then attempt to reestablish the connection using the new setting.
Section 3.2.2 on page 36
for more information.
Chapter 5 Access Point Mode Configuration