Ad-Hoc; Access Point Mode; Figure 1 Application: Infrastructure; Figure 2 Application: Ad-Hoc - ZyXEL Communications G-220F User Manual

ZyXEL AG-220 User's Guide

Figure 1 Application: Infrastructure

1.2.1.2 Ad-Hoc

To set up a small independent wireless workgroup without an AP, use Ad-Hoc.
Ad-Hoc does not require an AP or a wired network. Two or more wireless clients
communicate directly with each other.

Figure 2 Application: Ad-Hoc

1.2.2 Access Point Mode

You can also set the AG-220 to access point mode. This allows you to set up your wireless
networks without using a dedicated AP. The following figure shows a network example.
22 Chapter 1 Getting Started