Installer Manual; Connectors Tables; 20-Way Connector; Complete Electric Diagram - Gemini 931T Installation And Use Manual

INSTALLER MANUAL

6.0 - CONNECTORS TABLES

6.1 - 20-WAY CONNECTOR

POSITION WIRE FUNCTION
- 1 -
- 2 - Signal for system arming/disarming
- 3 - Signal for system disarming/disarming
- 4 -
- 5 - Doors push-button positive/negative input
- 6 - Receptacle for electronic key input
- 7 - Receptacle for electronic key negative ground
- 8 - LED negative output
- 9 - LED positive output
- 10 - Positive under key
- 11 - CAN BUS signal (CAN-H)
- 12 - CAN BUS signal (CAN-L)
- 13 - Positive output with system armed (+A)
- 14 - External sensors output
- 15 - Bonnet push-button negative input
- 16 - Pulse optic signalling
- 17 - Comfort negative output
- 18 - Codified self-powered siren or vehicle claxson output
- 19 - Antenna
Input for self-learning and system arming/disarming by
- 20 -
turn indicators
WHITE-ORANGE wire must ALWAYS be connected if system is to operate through the
!
6.2 - 8-WAY CONNECTOR
POSITION WIRE FUNCTION
- 1 - Ground
- 2 -
- 3 - Positiv
- 4 - Turn signals positive output
- 5 -
- 6 -
- 7 -
- 8 - Turn signals positive output
PAGE 06 - INSTALLER MANUAL
WIRE COLOUR
-----
YELLOW-BLUE
GREEN-BLUE
-----
GREEN-BROWN
BLACK marked "G"
LIGHT BLUE-GREY
LIGHT BLUE
GREEN-BLACK
WHITE-BLACK
YELLOW-BLACK
WHITE-ORANGE
turn indicators.
WIRE COLOUR
BLACK marked "M"
-----
e BLACK marked "R"
-----
-----
-----
ELECTRONIC KEY
-----
-----
RECEPTACLE
GREEN
BROWN
BLACK
RED
External sensors output
PINK
Doors push-button positive/negative input
GREEN
BLUE
LIGHT BLUE-GREY (CAN-H)
BLACK
Comfort output (negative)
Positive output with system armed (+A)
-----
ORANGE
-----
-----
-----
ORANGE
Codified self-powered siren,
supplementary siren or output for

7.0 - COMPLETE ELECTRIC DIAGRAM

Green
Brown
Red
Black
GREEN-BLACK
GREEN-BROWN
LIGHT BLUE (CAN-L)
CAN BUS signal
WHITE-BLACK
YELLOW-BLUE
GREEN-BLUE
Input for system operating
through vehicle door
lock motor unit
PINK
BLACK marked R (+30)
BLACK marked M (negative)
BLACK marked L
GREEN
YELLO -BLACK W
vehicle horns
BLUE
Pulse optic signalling
Before carrying out all
electrical connections,
disconnect the negative
!
battery terminal and re-
connect again after
completion.
BLACK marked "R"
15A
+
POSITIVE
Battery
BLACK marked "M"
GROUND
ORANGE
ORANGE
Turn signals indicators
WHITE-ORANGE
Input for system operating
through vehicle turn indicators
OPTIONAL
Bonnet switch
+30
BLACK marked "G"
Positive under key
INSTALLER MANUAL - PAGE 07