6. WEB PAGES
6.1. Benefit of Web Pages
The GenesysTM web pages are useful for:
• Reading the supply's model, identity, revision and LAN setup information
• Configuring the LAN connection
• Programming and reading the supply's DC output
This is all done graphically. There are no commands to look up
6.2. Opening the HOME Page
Once the rear panel LAN Status LED has turned green (see Section 3.3.4), you may open the Genesys™
web page
1. Read the IP address from the supply's front panel by holding the FOLD button (see section 5.1 for details)
2. Open a web page browser program such as Internet Explorer or Netscape Navigator.
Type the power supply's IP address as shown below. Click the GO button
The power supply's Home page will appear. If it does not, see Troubleshooting section 15
3. Al ternately, the hostname may then be used for addressing the web page as shown below (if the power
supply is set for "DHCP/Auto-IP", and if NetBIOS naming service is running on the computer). See Section
4.5 for a description of the hostname.
The power supply's Home page will appear. If it does not, see Troubleshooting section 15
20